Skip to main content
Logo print

Modular luminaire DL3X12O 39W/840 LED O AC

Ensto Diana ENSTO

Modular luminaire DL3X12O 39W/840 LED O AC

REF. DL3X12O 4260709 EAN. 6438389000917
You can only compare 4 products, you must remove 1 to add this one

Technical characteristics

Suitable for wall mounting No
Suitable for suspended mounting No
Suitable for ceiling mounting Yes
Suitable for built-in mounting Yes
Suitable for surface mounting No
Suitable for light line configuration No
Suitable for workplace according to EN 12464-1 No
Lamp type LED not exchangeable
With light source No
Suitable for number of light sources 1
Housing material Aluminium
Housing colour White
Material cover Plastic, opal
Type of grid None
Voltage type AC
Type of control gear LED operating device current-controlled
With control gear Yes
Exchangeable control gear Yes
Dimming 0-10 V No
Dimming 1-10 V No
Dimming DALI-2 No
Dimming DALI No
Dimming DMX No
Dimming DSI No
Dimming potentiometer (integrated) No
Dimming LineSwitch No
Dimming manufacturer's proprietary system No
Dimming mains voltage modulation No
Dimming phase cut-off No
Dimming phase cut-on No
Dimming programmable No
Dimming RF No
Dimming Sine Wave Reduction No
Dimming Touch and Dim No
Dimming Zigbee No
Dimming with push-button No
No dim function Yes
Light distributor Diffuser lens/optic/panel
Light sharing Symmetric
Beam angle Open beam/diffuse
Colour consistency (McAdam ellipse) SDCM3
Light outlet Direct
Rated life time L70/B50 at 25 °C 100000 h
Degree of protection (IP) IP44
Degree of impact strength (IK) IK07
Protection class II
Luminaire with limited surface temperature, sign "D“ according to EN 60598-2-24 No
Suitable for emergency lighting No
With movement sensor No
With light sensor No
Covering of the luminaire with thermally insulating material possible No
With air slots No
Max. system power 39 W
Luminaire efficacy 109 lm/W
Rated luminous flux according to IEC 62722-2-1 4270 lm
Colour of light White
Colour rendering index CRI 80-89
Width 297 mm
Height/depth 12 mm
Length 1197 mm
Type of wiring Suitable for through wiring
Number of poles 3
Conductor cross section 2.5 mm²
Connection type Push-in clamp

Documentation

3 documents
Installation Guide
IG_Diana.pdf pdf (1.91 Mo)
Light distribution file
Installation Guide
IG_Diana_3x12.pdf pdf (2.34 Mo)
2 documents
Product Sheet
PS_DianaFlatLED_EN.pdf pdf (0.53 Mo)
Product Sheet
PS_DianaFlatLED.pdf pdf (0.52 Mo)
1 document
Autocad 3D
3D_DL3X12O.dwg dwg (0.07 Mo)